Center differential lock button or driving pattern selector buton 6. Have your Toyota dealer correct it as soon as possible. Fully extend the shoulder belt to put it not use the seat until the seat belt or around the infant seat following the in the lock mode. The belt will as it will go to hold the infant seat se- move freely again and be ready to D Make sure the seat belt is securely. Get the required tools and spare To remove the jack, move the seat to the front-most position and turn the jack joint tire. Carefully disconnect the cables in the If your engine stalls while driving exact reverse order: the negative 1. Remove the wheel nuts and change the vehicle, raise it high enough so tires.
If coolant or steam is boiling out of the gine immediately. Also, be sure all accessories are turned off. If the connector is tight, wiggle it. Depress the accelerator pedal incorrect operation. D After inserting the rod into the slot, make sure the rod supports the hood securely from falling down on to your head or body. Automatic transmission selector lever or manual transmission gear shift lever 10.
Move cautiously off the ground, firmly set the parking road to a safe place well away from the Do not continue driving with a brake and put the transmission in traffic. Maintenance type batteries—Remove battery during heavy charging, the vent plugs. For scheduled mainte- Have the cause immediately lo- running. This product is available at your Toyota fect on handling, performance, braking, dealer and most auto parts stores. Leave sufficient slack in the does not recommend using a weight chain for turns. This not only keeps the luggage from being thrown out but also prevents exhaust gases from entering the vehicle. The instru- The outside of the windshield ment panel vents may be opened or For best results, set controls to: closed as shown.
Do not put a rear-facing child re- straint system in the rear seat if it in- terfers with the lock mechanism of the front seats. It is used in registering the size, construction and load capacity ownership of your vehicle. It probably needs adjustment or repair. Engine oil filler cap 5. Check the area around the vehicle be- 1.
These reflected signals can inter- inconsistent playing speed, fere with those received directly from the constant auto-reversing. Tool bag in the right side miscellany To remove: Turn the joint in direction 1 un- box til the jack is free. To lock: Turn the key downward. Move cautiously off the 7. To avoid serious personal injury, you Sun shade operation— must do the following.
This vents the hot air, allowing the air condi- tioning to cool the interior more quickly. If any of the fuses are blown, they must be replaced. Odometer—It shows the total distance the vehicle has been driven. Push back the auxiliary catch to re- ing in one of the lock buttons. Some important See Chapter 7-2 for additional informa- Check the lock release button of the se- clues are as follows:. Fully extend the shoulder belt to put it not use the seat until the seat belt or around the infant seat following the in the lock mode.
Take due care in handling the ornament avoid unexpected. Reduce your speed gradually, keeping cable and then the positive cable. D For your safety, do not place the shoulder belt under your arm. D Never allow anyone to rest their foot on the release pedal while the vehicle is moving. Air Intake selector Move the lever to select the air source.
For tow- blower, radio, ect. Trip meter—It shows the distance driv- en since the last time it was set to zero. This may damage the locking mechanism and the drive system. Use a spray de-icer to vehicle is moving. It cannot Remove excess length of the belt and Sit up straight and well back in the protect an adult occupant or your adjust the belt position.